1938-39 Ford Sequential LED Tail Light Lens (12v)

Adding to cart… The item has been added

Sequential 1938 and 1939 LED Tail Light Lens (12volt) Left or Right Hand. The Tail Light lens itself contains 19 modern style super bright LEDs to provide optimum brightness at the lowest possible amperage draw for a long life. When turn signals are activated the lens will sequence from the inside out filling the lens before turning off and sequencing again. There is also a brake attention function that has the lens sequence out filling the lens and then staying illuminated until the brake is released. This feature can be eliminated by running a wire from your brake lights switch to the yellow wire on the back of the lens allowing for the brakes to come on instantly rather than sequence. Has a polycarbonate lens with epoxy seal back allowing for thousands of hours of life from the light and lens as well.

There is a left hand/right hand selector switch on the back side that allows the lens to be used for either driver or passenger side of the vehicle. This same switch also has an off position that will cause the lens to function like stock, without any sequence function on the turn signals or the brake lights. SOLD AS EACH


 *May require the use of an LED FLASHER